Nortek Aquadopp 3000 3D Doppler current meter
|SeaVoX Device Catalogue
|Nortek Aquadopp 3000
|The Nortek Aquadopp 3000 is a single-depth doppler current meter designed for deployment in intermediate water depths down to 3000 m. It is suitable for use on moorings or fixed structures. It features higher power and an increased signal-to-noise ratio compared with the standard (300 m depth rated) Aquadopp so that it can provide accurate current measurements in water with low concentrations of suspended particulate matter. Current velocity is derived from the Doppler shift measured by two or three 2MHz acoustic beams. It comes with compass, tilt, pressure and temperature sensors. Data are stored on an internal data logger. It can be run in 'diagnostic' mode when set to collect data at 1 Hz frequency in user specified intervals, which allows studies of mooring motion and the performance of other current meters to be conducted.
|Has Current Version
|Nortek Aquadopp 3D doppler current meter
|L05 SeaDataNet device categories - (2)
Other formats for this page:RDF/XML Turtle JSON-LD
Other views of this page:
Alternate Profiles ?Different Media Types (HTML, text, RDF, JSON etc.) and different information model views, profiles, are available for this resource.
NVS html view ? Default NVS html view.