@prefix cpm: . @prefix dc: . @prefix dcat: . @prefix dce: . @prefix dct: . @prefix grg: . @prefix iop: . @prefix ns0: . @prefix ns1: . @prefix owl: . @prefix pav: . @prefix prov: . @prefix puv: . @prefix qudt: . @prefix rdf: . @prefix rdfs: . @prefix reg: . @prefix semapv: . @prefix skos: . @prefix sssom: . @prefix void: . skos:related . skos:member . skos:narrower . skos:related . skos:narrower . skos:narrower . skos:altLabel "K&Z CMP3 pyranometer" , "K&Z CMP3 pyranometer"@en ; skos:broader , ; skos:definition "{\"node\": {\n \"content\": [\n \"A high performance research grade pyranometer, which is fully compliant with all ISO 9060 spectrally flat Class C Instrument performance criteria. It is intended for shortwave global solar radiation measurements in the spectral range from 300 to 2800 nm. The thermopile detector measures irradiance up to 2000 W m\",\n \"with response time <18 seconds and typical sensitivity 10 µV W\",\n \"m\",\n \"that varies less than 5 % from -10 °C to +40 °C. The CMP3 pyranometer is designed for continuous indoor and outdoor use. It features a snap-on white sun shield, integrated levelling, and a weatherproof connector. Two CMP 3s can easily be mounted back-to-back to make a low-cost albedometer. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets. The pyranometer does not require any power, it supplies a low voltage of 0 to 20mV in relation to the amount of incoming radiation. Operating temperature range is -40 °C to +80 °C and the stability is better than 1 % per year.\"\n ],\n \"sup\": [\n -2,\n -1,\n 2\n ]\n}}"@en ; skos:inScheme ; skos:notation "SDN:L22::TOOL1604" ; skos:note "accepted"@en ; skos:prefLabel "Kipp and Zonen CMP3 pyranometer"@en ; skos:related , . skos:related . skos:related . skos:narrower .