@prefix cpm: . @prefix dc: . @prefix dcat: . @prefix dce: . @prefix dct: . @prefix grg: . @prefix iop: . @prefix ns0: . @prefix ns1: . @prefix owl: . @prefix pav: . @prefix prov: . @prefix puv: . @prefix qudt: . @prefix rdf: . @prefix rdfs: . @prefix reg: . @prefix semapv: . @prefix skos: . @prefix sssom: . @prefix void: . rdf:type skos:Concept ; dce:identifier "SDN:L22::TOOL1551" ; dc:date "2020-10-27 10:29:53.0" ; dc:identifier "SDN:L22::TOOL1551" ; dc:isVersionOf ; pav:authoredOn "2020-10-27 10:29:53.0" ; pav:version "1" ; void:inDataset ; owl:deprecated "false" ; owl:versionInfo "1" ; skos:altLabel "HOBI HydroDAS" ; skos:broader , ; skos:definition "An autonomous subsurface data handling system and controller for use in aquatic environments. It can be used with both profiling and moored instruments, as well as surface buoys. It can collect data from up to 27 different instruments at once (11 digital, 16 analog). The HydroDAS can be used in real-time profiling (multiplexing), autonomous logging and buoy controller modes. During real-time profiling and autonomous logging, raw data are displayed in real-time and archived as files to the logger's internal flash memory. As a buoy or mooring controller its serial ports can be used to interface with a radio or cellular modem for real-time telemetry. Various input/output configurations are available and are scalable to the application, with a MiniDAS available for smaller systems with 4 instruments or less in use. The HydroDAS operates autonomously with HydroScript programs using DASHost software. It features 128 MB internal memory with an optional 2 GB available. The HydroDAS has an operating temperature from 0-35 degC and is depth-rated to 750 m. Input voltage is 12 V DC nominal, operating from 7 V to 18 V DC. It has an active power consumption of 0.6-1.1 W dependent on the configuration."@en ; skos:notation "SDN:L22::TOOL1551" ; skos:note "accepted"@en ; skos:prefLabel "HOBI Labs HydroDAS data logger"@en ; skos:related , .