@prefix cpm: . @prefix dc: . @prefix dcat: . @prefix dce: . @prefix dct: . @prefix dcterms: . @prefix grg: . @prefix iop: . @prefix ns0: . @prefix ns1: . @prefix owl: . @prefix pav: . @prefix prov: . @prefix puv: . @prefix qudt: . @prefix rdf: . @prefix rdfs: . @prefix reg: . @prefix sdo: . @prefix semapv: . @prefix skos: . @prefix sssom: . @prefix void: . @prefix xsd: . rdf:type sdo:DefinedTerm ; sdo:description "{\"node\": {\n \"content\": [\n \"A high performance research grade pyranometer, which is fully compliant with all ISO 9060 spectrally flat Class A Instrument performance criteria. It is designed for measuring the irradiance (radiant flux, Watt m\",\n \") on a plane surface, which results from the direct solar radiation and from the diffuse radiation incident from the hemisphere above. A standard thermistor sensor is fitted to monitor the housing temperature. Each instrument is supplied with its own temperature and directional (cosine response) test data. A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug. The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets. The pyranometer does not require any power, it supplies a low voltage of 0 to 20mV in relation to the amount of incoming radiation.\"\n ],\n \"sup\": -2\n}}"@en ; sdo:inDefinedTermSet ; sdo:name "Kipp and Zonen CMP21 pyranometer"@en ; sdo:termCode "SDN:L22::TOOL1502" .