@prefix cpm: . @prefix dc: . @prefix dcat: . @prefix dce: . @prefix dct: . @prefix grg: . @prefix iop: . @prefix ns0: . @prefix ns1: . @prefix owl: . @prefix pav: . @prefix prov: . @prefix puv: . @prefix qudt: . @prefix rdf: . @prefix rdfs: . @prefix reg: . @prefix semapv: . @prefix skos: . @prefix sssom: . @prefix void: . rdf:type skos:Concept ; dce:identifier "SDN:L22::TOOL1469" ; dc:date "2020-06-02 14:50:38.0" ; dc:identifier "SDN:L22::TOOL1469" ; pav:authoredOn "2020-06-02 14:50:38.0" ; pav:hasCurrentVersion ; pav:version "1" ; void:inDataset ; owl:deprecated "false" ; owl:versionInfo "1" ; skos:altLabel "Reineck box corer" , "Reineck box corer"@en ; skos:broader , ; skos:definition "A marine geological tool that recovers undisturbed soft surface sediments, based on the design by Hans-Erich Reineck (1963). Also referred to as a 'spade' corer, it is designed for minimum disturbance of the sediment surface by bow wave effects. Traditionally, it consists of a weighted stem fitted to a square sampling box. The corer is lowered vertically until it impacts with the seabed. At this point the instrument is triggered by a trip as the main coring stem passes through its frame. While pulling the corer out of the sediment a spade swings underneath the sample to prevent loss. When hauled back on board, the spade is under the box."@en ; skos:inScheme ; skos:notation "SDN:L22::TOOL1469" ; skos:note "accepted"@en ; skos:prefLabel "Unspecified Reineck box corer"@en ; skos:related , .