@prefix cpm: . @prefix dc: . @prefix dcat: . @prefix dce: . @prefix dct: . @prefix grg: . @prefix iop: . @prefix ns0: . @prefix ns1: . @prefix owl: . @prefix pav: . @prefix prov: . @prefix puv: . @prefix qudt: . @prefix rdf: . @prefix rdfs: . @prefix reg: . @prefix semapv: . @prefix skos: . @prefix sssom: . @prefix void: . rdf:type skos:Concept ; dce:identifier "SDN:L22::TOOL1095" ; dc:date "2016-11-29 11:39:12.0" ; dc:identifier "SDN:L22::TOOL1095" ; dc:isVersionOf ; pav:authoredOn "2016-11-29 11:39:12.0" ; pav:version "1" ; void:inDataset ; owl:deprecated "false" ; owl:versionInfo "1" ; skos:altLabel "Vaisala HMT 360 series" ; skos:broader , ; skos:definition "The Vaisala HMT360 series of humidity and temperature transmitters are designed to measure humidity and temperature as well as dew point, mixing ratio, absolute humidity and wet bulb temperature. The series design is based on a probe containing a patented (HUMICAP) capacitive thin polymer film humidity sensor and a Pt100 platinum resistance thermometer. The HMT360 offers six interchangeable probe options depending on deployment configuration and environmental properties. HMT361 was developped for wall mounting. HMT363 model was constructed for duct mounting and tight spaces, with a probe length of 98.5 mm. HMT364 was designed for high pressures up to 100 bar and vacuum conditions. HMT365 was developed for high temperatures up to 180 degrees celsius. HMT367 was designed for high humidities. Finally, HMT368 was designed for pressurised pipelines up to 40 bar and comes in two different probe lengths. These sensors were developed to measure data in hazardous areas, including potentially explosive environments (containing gases or dust)."@en ; skos:notation "SDN:L22::TOOL1095" ; skos:note "accepted"@en ; skos:prefLabel "Vaisala HMT 360 series Humidity and temperature transmitters"@en ; skos:related .